India fermentation tanks was designed through the India brewing market, double brewed of brewhouse, mirror finish, full jackets, spunding valves, etc.,
Material: SUS 304 stainless steel;
Inner–jacket, TH=3.0mm; Outer-jacket, TH=2.0mm;
Dimple plate jacket for cooling, double or single avaliable
Design pressure 0.4MPa; Working pressure 0.2Mpa
PT100Temp. sensor for high accuracy temperature control;
Mirror polishing to 0.4μm without dead corner
Side shadowless manway 330*430mm
Rotation racking arm
Dry hops adding port
Customized design is avalibale.
1. Construction by high quality SUS 304 food grade stainless steel, all pipes are sus304, all labels are English.
2. All tanks will be tested and detected in the NDT room after finished, to ensure no leakage.
3. All jackets will do water pressure testing, testing pressure: 0.4Mpa, working pressure:0.15Mpa;
4. All tanks will be pressure protection 48hours before leaving from factory;
5. All the welding done by using water to protect the inner tank smooth and jackets uniform.
6. All the welds are TIG full welded, and acid pickled and passivated.
7. All tanks are mirror polishing inside, all ports are recessed type.