• Add: Qilu cultural creative center, Shunfeng Road, High-tech zone, Jinan
    Telephone: +86-531-82979225
Your position:HOME > English > PRODUCT > Fermentation tanks >

Product name:1000L-2000L Stainless steel brewing equipmentstainless ferm

Product number:

View no.:

Detailed introduction
1000L-2000L Stainless steel brewing equipment,stainless fermenter

Fermentation tanks is also called CCT (Cylindrical Conical Fermentation Tank), FV (Fermentation Vessel), primary fermenter or unitank as they are used both for fermenting and sotage. Micet stainless steel fermenter can be individually temperature controlled through glycol jackets and are fully equipped with accessories such as pressure relief valve, CIP cleaning ball, sample valve, manhole,etc Fermenting is the process during which the yeast transforms the wort into beer. Bright beer takes place after fermenting and mainly function is to make the beer more clear and store a longer time.

1.Effective volume: 10BBL-40BBL;

3.Inner–jacket (SUS304), TH=3.0mm;

4.Outer-jacket(SUS304), TH=2.0mm;

5.Dish head(SUS304), TH=2.0mm;

6.Insulation: PU-thickness:100mm;

7.60°cone, dimpled cooling jacket on bottom and side;

8.Cooling media: glycol water or alcohol water;

9.Stringent jacket leakage test by water and pressured gas;

10.360°coverage CIP spraying ball for cleaning;

l1. PT100Temp. sensor for high accuracy temperature control;

l 2.Design pressure 0.4MPa; Working pressure 0.2Mpa

l3.Side shadowless manway 430*530mm

14.PRV Valve on top of the tank;

l5.Sanitary sample valve; Thermometer;

l6.4''Dry hops adding port; Rotation racking arm;

l7.100% TIG full welded joints;

l8.Interior overall polishing to 0.4μm without dead corner.

l9.4pcs completely SUS304 heavy duty legs with leveling pad


Quality standard:

1. Construction by highquality SUS 304 food grade stainless steel, all pipes are sus304.

2. All tanks will be tested and detected in the NDT room after finished, to ensure no leakage.

3. All jackets will do water and pressure testing, testing pressure: 0.4Mpa, working pressure:0.15Mpa;

4. All tanks will be pressure protection 48hours before leaving from factory;

5. All the welds are TIG full welded, dimpled jacket by using water to weld to make sure uniform to be long life.

6. All tanks are mirror polishing inside.

7. All the manways and clamps gaskets will be EPDM sanitary.

Message Board
Brewery name:
Full name: *
Country: *
Email: *
Message: *