5000L Fermenter for brewery/microbrewery/ brewery factory
1.Effective volume: 40BBL;
2.Gross volume: 50BBL;
3.Inner–jacket (SUS304), TH=3.0mm;
5.Dish head(SUS304), TH=2.0mm;
7.60°cone, dimpled cooling jacket on bottom and side;
8.Cooling media: glycol water or alcohol water;
9.Stringent jacket leakage test by water and pressured gas;
10.360°coverage CIP spraying ball for cleaning;
l1. PT100Temp. sensor for high accuracy temperature control;
l 2.Design pressure 0.4MPa; Working pressure 0.2Mpa
l3.Side shadowless manway 430*530mm
14.PRV Valve on top of the tank;
l5.Sanitary sample valve; Thermometer;
l6.4''Dry hops adding port; Rotation racking arm;
l7.100% TIG full welded joints;
l8.Interior overall polishing to 0.4μm without dead corner.
l9.4pcs completely SUS304 heavy duty legs with leveling pad
1. Construction by highquality SUS 304 food grade stainless steel, all pipes are sus304.
2. All tanks will be tested and detected in the NDT room after finished, to ensure no leakage.
3. All jackets will do water and pressure testing, testing pressure: 0.4Mpa, working pressure:0.15Mpa;
4. All tanks will be pressure protection 48hours before leaving from factory;
5. All the welds are TIG full welded, dimpled jacket by using water to weld to make sure uniform to be long life.
6. All tanks are mirror polishing inside.
7. All the manways and clamps gaskets will be EPDM sanitary.