20% head space;
Inner–jacket (SUS304), TH=3.0/3.5mm; Outer-jacket: 2.0mm;
Insulation: PU-thickness: 100/120mm.
60degree cone; 2 zone dimpled jacket on bottom and side;
360°coverage CIP spraying ball for cleaning.
Design pressure 0.4MPa; Working pressure 0.2Mpa
PT100Temp. sensor for high accuracy temperature control;
Full sanitary sample valve
100% TIG welded joints;
Mirror polishing to 0.4μm without dead corner.
Side shadowless manway 530*430mm
Rotation racking arm;
Dry hops adding port
Complete valves, fittings and all parts
1. Construct with high quality SUS 304 food grade stainless steel, all fitting &valves are tri-clamped;
2. All the welding is 100% TIG full welded;
3. All tanks are Mirror polish inside without corner, welds grinded to Ra 0.4um;
4. All tanks welds will be acid cleaning;
5. All tanks will be tested before leaving from factory; Test pressure: 3Bar, jacket working pressure: 2Bar;
1.All tank ports packed with plastic cover prevent dust from going in the tank keeping them clean.
2. All tanks will be cleaned before loading, removal of polishing compound;
3.Tri-clamps and seals are packed into separate boxes or bags.
4. All stand tanks will be packed with PE films and bubble plastic, and to fix to the inside of container.
5. For horizonal tanks, will be packed through steel frame on cradle and secured with bolts. Secure one end of the cradle the leveling feet threads. Weld the bolt to the Add a spot weld to the bolt to prevent it from becoming loose.
Customized design according to cost is avaliable. Pls contact us for offer.